Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The correct way to close the doors of the Citroen Berlingo MK3

Model: Citroen Berlingo MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car door

See other generations:
Video tutorial

This video is valid for both the Citroen Berlingo and the Peugeot Partner, as they are essentially the same vehicle: it may seem unnecessary to be told how to close the doors of your van, but it is not. The doors of these vans have a slightly different weight compared to doors of other vehicles, so we tend to slam them with force and this damages the doors, causing them to start vibrating and squeaking.

Inside there are sliders that slide the glass down, and the bolts that hold them in place end up hitting against the bodywork, due to the excessive force we put into closing them; even the closing strap can wear out and start rattling.

To close them correctly, simply go past the point where the strap holds the door, and just let it go: it will close by itself.


Posted on 8 June 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Citroen Berlingo 3
Citroen Berlingo (2018-2026 / MK 3) To correctly and independently reset the service light on your Citroen Berlingo Mk3, follow these steps. First, enter the vehicle and ensure it is co…
How do you reset the AdBlue light on the Citroën Berlingo?
How do you reset the AdBlue light on the Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) To make the AdBlue warning light disappear from the instrument panel of the Citroën Berlingo, it will be possible to top up with the necessary amount…
How to Program the Key Remote for the Citroen Berlingo
How to Program the Key Remote for the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today, we will look at the instructions to program the key remote for the Citroen Berlingo. First, get in the vehicle with the remote and insert the …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos