Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroen Berlingo 3

Model: Citroen Berlingo MK 3 - Years 2018-2026
Part: Warning light – error code

To correctly and independently reset the service light on your Citroen Berlingo Mk3, follow these steps. First, enter the vehicle and ensure it is completely off with the doors closed. Then, locate the buttons in the centre of the dashboard, between the rev counter and the speedometer, and press and hold the buttons at both ends. Next, insert the key and turn on the ignition. Wait a few seconds, and as soon as you notice the reset is complete, release both buttons.

Updated on 20 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Service Light on the Citroen Berlingo 2
How to Reset the Service Light on the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this guide for your Citroen Berlingo Mk2 (2008-2018), discover the steps to manually reset the vehicle's service light. First, get inside the car …
How to Reset the Service Light on Citroen Berlingo 2
How to Reset the Service Light on Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this guide for all of you with a Citroen Berlingo second series (2008-2018), we will discover how to correctly perform the manual reset of the ser…
How to reset the tyre pressure warning light on the Citroën Berlingo?
How to reset the tyre pressure warning light on the Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) To reset the tyre pressure warning light on the Citroën Berlingo, turn the key in the ignition switch to power on the instrument cluster. Next, acces…

Other guides you may be interested in

    Frequently Asked Questions

    • Berlingo 2008-2018 - How to reset the radio of the Citroen Berlingo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos