Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the key remote control for the Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

Video tutorial

Today we will see the instructions that will allow us to program the remote control of the Citroen Berlingo key. First of all, we get into the car with the remote control and start by inserting the key into the ignition cylinder and turning it to position two; now we hold down the door lock button for about ten seconds, as shown in the video.

At this point, we remove the key and press the door lock and unlock buttons; then we follow the guided procedure to confirm the association of the remote control, following the video tutorial until the end!


Posted on 11 September 2024 by ScegliAuto


Related tutorials

How do you program the key of the Citroën Berlingo?
How do you program the key of the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To program the key of the Citroën Berlingo, you need to insert the blank key into the ignition block: once it has been inserted, you can connect a di…
How to Replace the Remote Control Battery of the Citroen Berlingo?
How to Replace the Remote Control Battery of the Citroen Berlingo?
Citroen Berlingo (2018-2026 / MK 3) To replace the battery of the remote control for the Citroen Berlingo, you only need a small flat screwdriver or a similar object. Before starting, o…
How to Programme the Remote Control for a Citroen Berlingo
How to Programme the Remote Control for a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today, I will explain how to programme the second remote control for a 2013 Citroen Berlingo. To perform this operation, you need to use a diagnostic…

Other guides you may be interested in

How to Remove the Rear Bumper on a Peugeot 308

This article outlines the procedure to remove and replace the rear bumper on a Peugeot 308 T9. First, remove the screws located in the wheel arch of the rear wheels, then remove the plastic clips underneath the bumper. Next, take off the wheel arch cover, and remove the plastic nut. After removing the nut, disconnect the connectors present. Now, remove the fixing screws located underneath the bumper and also the plastic clips. Once all clips and screws are removed, you can take off the bumper for repair or replacement.

Watch the video!


by ScegliAuto

More videos