Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the ignition switch of the Citroën Berlingo?

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door lock

See other generations:
Video tutorial

In order to replace the ignition switch of the Citroën Berlingo, you will need to loosen the screws that secure the steering column trim panels: once these panels have been removed, you can proceed by loosening the underlying screws that secure the switch to its seat.

You will then need to proceed by disconnecting all the connectors that are connected to the corresponding switch: the new replacement part can then be inserted.

After the switch has been inserted, it can be secured and connected to verify its operation.


Posted on 4 September 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Citroen Berlingo 2
How to Reset the Service Light on the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this guide for your Citroen Berlingo Mk2 (2008-2018), discover the steps to manually reset the vehicle's service light. First, get inside the car …
How to Set the Clock on a Citroën Berlingo?
How to Set the Clock on a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To adjust the clock on the Citroën Berlingo, turn the ignition key in the ignition barrel to switch on the instrument panel. Once the panel is on, pr…
Location of the Reverse Light Switch on the Citroen Berlingo
Location of the Reverse Light Switch on the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) This video shows where the reverse light switch is located on the Citroen Berlingo. Naturally, this switch is found on the gearbox, but one might won…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos