Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : How to reset the service light on Citroen Berlingo 2

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Instrument cluster
Operation: How to reset the service light on Citroen Berlingo 2

In the following guide dedicated to your Citroen Berlingo Mk2 (year 2008-2018) we will find out what are the steps to take if you want to manually reset the vehicle's service warning light. First, go inside the car and make sure it is completely turned off. Immediately after, locate the button located below the speedometer and hold it down. At the same time insert the key, turn it and turn on the instrument panel. Then wait for the end of the countdown which will appear automatically on the mini display and at the end release the button. Turn off the ignition and you're done.


Posted on 19 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Berlingo 2008-2018 - Why is the dashboard of the Citroen Berlingo 2 not working? Read Answer
    • Berlingo 2018-2028 - What does the Citroen Berlingo's AdBlue light indicate? Read Answer
    • Berlingo 2008-2018 - What do the indicators in the dashboard of the Citroen Berlingo mean? Read Answer
    • Berlingo 2018-2028 - When does the AdBlue light come on on Citroen Berlingo? Read Answer
    • Berlingo 2018-2028 - What to do when the AdBlue light stays on after filling the tank on Citroen Berlingo? Read Answer
    • Berlingo 2018-2028 - Meaning of the warning lights on the Citroen Berlingo? Read Answer
    • Berlingo 2018-2028 - What are the warning lights on the Citroen Berlingo? Read Answer
    • Berlingo 2018-2028 - What is the meaning of the warning lights on the dashboard of the Citroen Berlingo? Read Answer
    • Berlingo 2008-2018 - What does the yellow engine light on the Citroen Berlingo mean? Read Answer
    • Berlingo 2018-2028 - What are the warning lights on the dashboard of the Citroen Berlingo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos