Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the side turn signal light bulb of the 2011 Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Side marker bulb

Today we will explain how to replace the side turn signal bulb of the 2011 Citroen C4 Picasso. Insert a flat-head screwdriver into the plastic bulb holder in order to apply pressure outwards to remove it. Disconnect the connector from the bulb and proceed with the replacement. Insert the new bulb into the connector and place it on the outside of the plastic in order to mount everything on the car. Test the bulb by turning on the instrument panel and then the lights.

Posted on 5 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the side indicator bulb of the Citroen C4 Picasso
How to replace the side indicator bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) If you want to change the side indicator light bulb of your Citroen C4 Picasso by yourself, you must carefully read the following procedure and follo…
How to replace the front turn signal bulb of the Citroen C4 Picasso
How to replace the front turn signal bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Below we will see the necessary procedure that will allow us to disassemble and replace the turn signal bulb of the front headlight of the Citroen C4…
How to replace the side indicator bulb of the Citroen C4 Picasso
How to replace the side indicator bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In this video we can see how to change the side indicator light on a Citroen C4 Picasso. The youtuber uses a screwdriver, masking it from the body si…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos