Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a DS5

Model: Citroen Ds5 MK 1 - Years 2011-2019
Part: Instrument cluster

How to remove the instrument cluster from a DS5? Follow these steps to perform the removal: insert the screwdriver into the designated holes (as shown in the video) located in the trim plastics of the instrument cluster. Pry at the top of the instrument cluster until it detaches from the dashboard. After removing the instrument cluster, pull the piece out of the dashboard and disconnect the power connectors (located at the back of the instrument cluster). Install a new piece or replace the LEDs/bulbs in the cluster and reassemble it. Finally, reverse the assembly steps.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the instrument panel of the Citroen DS5
Disassembly of the instrument panel of the Citroen DS5
Citroen Ds5 (2011-2019 / MK 1) Below we will see the main instructions that will allow us to disassemble and replace the instrument panel of the Citroen DS5. First, we get into the…
How to replace the air filter of the DS5
How to replace the air filter of the DS5
Citroen Ds5 (2011-2019 / MK 1) To replace the air filter of the DS5, first lift the hood, using a 6mm socket wrench unscrew the bolt of the clamp that holds the tube to the air fil…
Where is the OBD port located in the Citroen DS5?
Where is the OBD port located in the Citroen DS5?
Citroen Ds5 (2011-2019 / MK 1) To locate the OBD port inside your Citroen DS5, simply follow the procedure described in our new guide. First of all, you need to reach the interior,…

Other guides you may be interested in

    Frequently Asked Questions

    • Ds5 2011-2019 - How do I change the language on the Citroen DS5 display? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos