Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the side door of the Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car door

See other generations:
Video tutorial

Today we will explain how to adjust the passenger door on a Citroen Berlingo. To adjust the door, we need to use a torque wrench.

We remove the upper side cover of the inside of the door in order to access the upper bolt. It is very common that on doors with sliding opening it may be necessary to adjust the bolt to prevent the door from lowering and damaging the swing arm. We tighten the nut on the top and then on the bottom if necessary we use lubricant before proceeding.

After tightening the bolt, we mount the cover and perform the same procedure for the left passenger door.


Posted on 10 November 2025 by ScegliAuto


Related tutorials

How to set the time in the Citroen Berlingo van?
How to set the time in the Citroen Berlingo van?
Citroen Berlingo (2018-2026 / MK 3) In this tutorial, you can see how to set the time in the Citroen Berlingo van, a very simple and quick operation, to be done after disconnecting the …
Replacing the Lock on Citroen Berlingo
Replacing the Lock on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Open the door and remove the dust cover plate on the side, which prevents access to the lock. Use a flat screwdriver to pry it off. Using a small scr…
How to Remove the Door Panel of the Citroen Berlingo
How to Remove the Door Panel of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) This guide illustrates the procedure for removing and replacing the door panel of the Citroen Berlingo, as well as the Peugeot Partner. First, open t…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos