Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob of a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Shift knob

Want to replace the gear knob of a Citroen C3? Here’s how to remove it: disconnect the leather gaiter frame with a plastic lever (if to be replaced), take the knob in your hands and twist it left and right until it comes off the gear stick (Twist type). To install: take the new knob and slide it onto the stick present in the centre console; tighten it onto the stick and fit the new leather gaiter with the clips (if removed). Finally, test the correct installation of the knob by moving the stick on the centre console.

Updated on 8 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Gear Knob on a Citroen C3
How to Replace the Gear Knob on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) To replace the gear knob on a Citroen C3, follow this procedure: first, detach the plastic around the gear lever, then pull upwards to reach the clip…
How to Replace the Gear Knob on a Citroen C3
How to Replace the Gear Knob on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) This guide will show you the main steps to remove and replace the gear knob on a Citroen C3. First, get inside the vehicle and start by removing the …
How to Replace the Gear Knob and Gaiter on a Citroen C3
How to Replace the Gear Knob and Gaiter on a Citroen C3
Citroen C3 (2009-2016 / SC) Today, you will learn how to replace the gear knob and gaiter on your Citroen C3. First, remove the gaiter that covers the gear knob by pulling the s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos