Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front door panel on the Citroen C4 Picasso?

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, we can see how to disassemble the front door panel on the Citroen C4 Picasso, a very simple and quick operation. First, we open the door we will be working on, then we unscrew the two screws located along the outer edge and disengage the cover of the handle.

Next, we unscrew all the remaining indicated screws, remove the window switch console, and disconnect the connectors. At this point, all that remains is to separate the panel from the door by pulling it both upwards and towards us and install any replacement by following the reverse procedure.


Posted on 27 January 2026 by ScegliAuto


Related tutorials

How to Remove the Tailgate Panel on a Citroen C4 Picasso
How to Remove the Tailgate Panel on a Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) How to remove the tailgate panel on a Citroen C4 Picasso? In this video, learn how to do it. Open and lift the tailgate of your car, and using a scre…
How to replace the cabin air filter on a Citroen C4 Picasso
How to replace the cabin air filter on a Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) The instructions in this guide will allow you to remove and replace the cabin air filter on the Citroen C4 Picasso. First, open the front passenger d…
How to Dismantle the Panel on a Citroen C4 Picasso
How to Dismantle the Panel on a Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) How to dismantle the panel on a Citroen C4 Picasso? Let's see how to proceed in this video. Before starting the dismantling work, disconnect the batt…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos