Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Clean the Window Switch Panel in a Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Window switch

This short video shows how to remove and clean the window switch panel in a Citroen C4 Grand Picasso. First, detach and extract the panel from its compartment, also removing its cover or mask. Next, you can detach and extract the body of the panel along with all the buttons, leaving only the electronic control board. After performing all necessary cleaning and maintenance operations, you can reassemble everything, following the same procedure as the assembly phase but in reverse.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Citroen C4 Grand Picasso
How to Remove the Door Panel on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Want to replace the door panel on a Citroen C4? Here’s how to remove the door panel. Remove the window switch button located in the handle (disconnec…
How to Remove the Window Switch on a Xsara Picasso
How to Remove the Window Switch on a Xsara Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Want to remove the window switch on your Xsara Picasso but don't know how? Follow these steps in the video. Use a plastic spatula to detach the switc…
How to Remove the Windscreen Washer Pump from the Citroen C4 Grand Picasso
How to Remove the Windscreen Washer Pump from the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In today's tutorial video, you will see the instructions that will allow you to remove and replace the windscreen washer pump of the Citroen C4 Grand…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos