Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Switch on a Xsara Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Power window switch

Want to remove the window switch on your Xsara Picasso but don't know how? Follow these steps in the video. Use a plastic spatula to detach the switch panel for the window controls located in the internal handle. Disconnect the terminals of the window switch, being careful not to cut the power wires. Replace the damaged switch panel with a new one (always compare it with the one being replaced). To reassemble, connect the power terminals and insert the switch panel into the handle on the door panel.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Clean the Window Switch Panel in a Citroen C4 Grand Picasso
How to Remove and Clean the Window Switch Panel in a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) This short video shows how to remove and clean the window switch panel in a Citroen C4 Grand Picasso. First, detach and extract the panel from its co…
How do you replace the window lifter of the Citroën C4 Picasso?
How do you replace the window lifter of the Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In order to replace the window lifter of the Citroën C4 Picasso, you need to loosen the screws that fix the door panel to its housing: these screws w…
How do you replace the window regulator of the Citroën C4 Picasso?
How do you replace the window regulator of the Citroën C4 Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) The replacement of the window lifter of the Citroën C4 Picasso can be carried out by loosening the screws that fix the door panel to its housing: the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos