Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Door trim panel

Want to replace the door panel on a Citroen C4? Here’s how to remove the door panel. Remove the window switch button located in the handle (disconnect the power connector), remove the plastic cover above the handle (remove the fastening screws). Unscrew all the fastening screws on the cover panel. Use a lever to detach the clips securing the panel. Finally, grasp the panel with your hands and pry it off the door. Remove all pieces from the old panel, then fit them onto the new panel. Refit the panel onto the door.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror of the Citroen C4 Grand Picasso
How to disassemble the external rearview mirror of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) The following steps will show us how to disassemble and replace the external rearview mirror of the Citroen C4 Picasso and Grand Picasso. First of al…
How to Open the Stuck Boot of the Citroen C4 Grand Picasso
How to Open the Stuck Boot of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Briefly follow these instructions to manually open the stuck boot of the Citroen C4 Picasso and C4 Grand Picasso. First, open the rear door and recli…
Removing the Cabin Fan from a Citroen C4 Grand Picasso
Removing the Cabin Fan from a Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) This guide outlines the main steps for removing and replacing the cabin fan in the Citroen C4 Picasso and Grand Picasso. First, get into the vehicle …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos