Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil and Filter on a Citroen C3 MK2 Petrol

Model: Citroen C3 SC - Years 2009-2016
Part: Engine oil

Let's see how to change the oil and filter on the Citroen C3 MK2: it is advisable to follow the example in the video and add a pre-oil change cleaner like Liqui-Moly, which can be purchased on Amazon with code B001CZSG94 for £15.05, with free next-day delivery for Prime customers. Add the cleaner to a warm engine and let it run at idle for about 10/15 minutes. Allow it to cool, lift the car on two axle stands, remove the undertray, and unscrew the drain bolt. Let the oil drain into a large container: dispose of the liquid at an authorised centre, along with the used filter. Now move to the filter, located in the engine bay, and remove it from the top. Unscrew it and replace it with a new one: lubricate the filter seal with new oil. Fit the new plug and washer to the drain; replace the undertray and set the car back on level ground. Now refill with new oil to 90% of capacity and then check with the dipstick. Verify and add gradually, measuring each time; the level should be close to the "max" level.

Posted on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2016-2023 / SY, SX) In this video tutorial, you can see how to replace the cabin filter in a 2019 Citroen C3 1.2 petrol by following a few simple steps. After purchasing…
Citroen C3 (2002-2009 / FC, FN) On the Citroen C3 1.4 petrol, the oil change with filter replacement is performed with the vehicle off and safely. Lift the car at suitable support p…
Citroen C3 (2002-2009 / FC, FN) In this tutorial, you will see how to replace the rocker cover gasket on a Citroen C3 1.4 petrol, a very simple operation. First, ensure that the eng…

    Frequently Asked Questions

    • C3 2009-2016 - How many liters of engine oil does it take in the Citroen C3 1.2 petrol engine? Read answer

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos