Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Filter on a Citroen C3

Model: Citroen C3 SY, SX - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

See other generations:
Video tutorial

To change the cabin filter on a Citroen C3, access it from under the grille at the base of the windscreen on the right side. The plastic grille is held by 4/6 cross-head screws visible from above; unscrew all the screws and keep them in a safe place.

Lift the grille, and underneath you will find a rubber mat that seals against water. Below it is the filter, a rectangular plastic box with a lid that has two tabs on the sides: press them inward and lift the lid. Remove the old filter noting its orientation.

Clean the container from dust and debris and place the new filter, remembering the orientation of the old one. Close the lid, reposition the rubber mat, replace the plastic grille, and screw the screws back in.


Posted on 28 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Citroën C3?
How to Replace the Cabin Filter on a Citroën C3?
Citroen C3 (2002-2009 / FC, FN) To replace the cabin filter on a Citroën C3, open the bonnet to access the engine bay, specifically the grille located just below the windscreen. Her…
Replace the Cabin Air Filter on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Let's replace the worn pollen filter on a Citroen C3 and see how to do it. The cabin filter is located in the engine compartment under the windscreen…
Replacing the Cabin Filter on Citroen C3
Replacing the Cabin Filter on Citroen C3
Citroen C3 (2002-2009 / FC, FN) Do you want to replace the cabin air filter on the Citroen C3? Here’s how to remove the filter from the engine bay. Lift the front bonnet of the car,…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos