Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Filter on Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Cabin air filter

Do you want to replace the cabin air filter on the Citroen C3? Here’s how to remove the filter from the engine bay. Lift the front bonnet of the car, locate the plastics covering the cabin air filter. Unscrew the filter cover (where the air filter is located). Once the screws are removed, take off the cap from the filter housing, then extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the housing. Refit the cover cap of the filter housing and tighten the screws. Close the engine bay with the bonnet after completing the installation.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter of the Citroen C3
How to replace the cabin filter of the Citroen C3
Citroen C3 (2009-2016 / SC) Replacing the cabin air filter of the Citroen C3 is a really simple and quick operation to do independently. To replace the filter, we would need a f…
How to replace the cabin air filter of the Citroen C3
How to replace the cabin air filter of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) The cabin air filter of the first series Citroen C3 is located inside the front hood, specifically behind a small door located above the seal between…
How to replace the cabin air filter of the Citroen C3 2023
How to replace the cabin air filter of the Citroen C3 2023
Citroen C3 (2016-2023 / SY, SX) When the cabin air filter of your Citroen C3 (year 2023) is too worn out, you must proceed with its replacement as soon as possible. Luckily, it is a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos