Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter on the Citroen C4 Picasso 1.6 HDi

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Diesel fuel filter

This guide provides instructions for replacing the diesel filter on the Citroen C4 Picasso 1.6 HDi. First, open the bonnet of the vehicle and locate the diesel filter, which is next to the air filter box; disconnect the diesel pipes and finally the electrical connector, as shown in the video. Open the diesel filter to remove and replace the cartridge inside, installing the new original one; reassemble the diesel filter and reconnect everything, then start the engine!

Posted on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Fuel Filter on a 1.6 HDi Peugeot/Citroen Engine
How to Change the Fuel Filter on a 1.6 HDi Peugeot/Citroen Engine
Citroen C4 Picasso (2013-2022 / MK 2) In this video, see how to change the diesel filter on a Citroen C4 Picasso with a 1.6 HDi engine. The filter is located on the right side of the engi…
How to Replace the Diesel Filter on the Citroen C4 Grand Picasso 2 1.6 eHDI
How to Replace the Diesel Filter on the Citroen C4 Grand Picasso 2 1.6 eHDI
Citroen C4 Picasso (2013-2022 / MK 2) In today's tutorial, you will see how to remove and replace the diesel filter on the second generation Citroen C4 Grand Picasso with a 1.6 eHDI engin…
Replacing the Fuel Filter on Citroen C4 Picasso
Replacing the Fuel Filter on Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Want to replace the fuel filter without going to a garage? Let’s see how to replace the fuel filter on a C4 Picasso. Lift the bonnet and secure it, t…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos