Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Fuel Filter on a 1.6 HDi Peugeot/Citroen Engine

Model: Citroen C4 Picasso MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Diesel fuel filter

See other generations:
Video tutorial

In this video, see how to change the diesel filter on a Citroen C4 Picasso with a 1.6 HDi engine. The filter is located on the right side of the engine bay, near the battery, and is connected to 2 electrical connectors (water sensors in the diesel) and two fuel pipes (inlet and outlet).

First, it is advisable to disconnect the battery, then remove the electrical connectors, detach the fuel pipes and extract the filter. Transfer the differential sensor from the old filter to the new filter, which you can obtain on eBay with the code 112976635315 for £19.36, with free delivery.

Insert the new filter in its place (some versions have a bracket); reconnect the pipes, paying attention to the flow direction indicated above, reconnect the electrical connectors, reconnect the battery, and start the car to circulate the diesel: the engine may shake for a moment due to air in the system.


Posted on 12 March 2026 by ScegliAuto


Related tutorials

Citroen C4 Picasso (2013-2022 / MK 2) This guide provides instructions for replacing the diesel filter on the Citroen C4 Picasso 1.6 HDi. First, open the bonnet of the vehicle and locate …
Citroen C4 Picasso (2006-2013 / MK 1) In this guide, you will see the procedure for removing and replacing the engine air filter on the Citroen C4 Picasso 1.6 HDI. First, open the bonnet …
Citroen C4 Picasso (2006-2013 / MK 1) This guide provides step-by-step instructions to remove and replace the timing belt on the Citroen C4 Picasso 1.6 HDI. The timing belt on this engine…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos