Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C4 Picasso
  6. : When and how to change the timing belt on the Citroen C4 Picasso 1.6 HDI

Citroen C4 Picasso - Video tutorial

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Timing belt
Operation: When and how to change the timing belt on the Citroen C4 Picasso 1.6 HDI

In this guide, we will see the step-by-step instructions that will allow us to disassemble and replace the timing belt of the Citroen C4 Picasso 1.6 HDI. The timing belt, on this type of engine, must be replaced no later than 120,000 kilometres; however, it is advisable to carry out a check already at 60,000 kilometres. The belt replacement procedure requires jacking up the car and removing the right front wheel; it is therefore necessary to disassemble the wheel arch and remove the engine support to access the engine timing system. So let's proceed with the disassembly and replacement of the timing belt, following the video tutorial to the end!


Posted on 26 December 2022 by ScegliAuto



How do you replace the timing belt of the Citroën C4 Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) In order to replace the timing belt of the Citroën C4 Picasso, you need to lift the car so that the front wheel is not in contact with the ground: on
Replacement of the gear lever cable for the Citroen C4 Picasso 1.6 HDI.
Citroen C4 Picasso (2006-2013 / MK 1) In this video tutorial, we will see how to disassemble and replace the cable of the gear lever of the Citroen C4 Picasso 1.6 HDI. First, we open the
How to replace the injectors of the Citroen C4 Picasso 1.6 HDI
Citroen C4 Picasso (2013-2022 / MK 2) Today we will see, in this video tutorial, how to remove and replace the injectors of the Citroen C4 Picasso, with 1.6 HDI engine. First we open the

    Frequently Asked Questions

    • C4 Picasso 2013-2022 - After how many km do you have to replace the timing belt of the Citroà «n C4 Picasso? Read Answer

How to manually open the door of the Volkswagen Polo

If the smart key of your Volkswagen Polo has stopped working and you are unable to open the car door then you just have to put into practice the instructions described in the following mini guide. First take your key, press the metal button located at the top and take out the physical emergency key. Immediately after, go to the door handle, pull it with your hand and at the same time remove the plastic side part. Once this is done, insert the key into the key slot and turn it to unlock the door.

Watch the video!


by ScegliAuto

More videos