Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the 2012 Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

Today, you will learn how to replace the timing belt on the 2012 Citroen C4 Picasso independently. To perform the timing belt replacement, open the front bonnet and use a spanner to undo the nut that secures the belt to the roller.

After undoing the nut and releasing the tension, slide the belt off the roller. Grease the new timing belt and insert it onto the roller.

Tighten the nut to restore tension to the belt. Close the front bonnet at the end of the procedure.

During this operation, it may be necessary to put the vehicle on a ramp to also replace the water pump.


Posted on 26 April 2026 by ScegliAuto


Related tutorials

How to replace the timing belt of the Citroen C4 Picasso 1
How to replace the timing belt of the Citroen C4 Picasso 1
Citroen C4 Picasso (2006-2013 / MK 1) To replace the timing belt of the Citroën C4 Picasso model 1, we must open the front hood and disconnect the battery, then lift the front part of the…
When and How to Change the Timing Belt on the Citroen C4 Picasso 1.6 HDI
When and How to Change the Timing Belt on the Citroen C4 Picasso 1.6 HDI
Citroen C4 Picasso (2006-2013 / MK 1) This guide provides step-by-step instructions to remove and replace the timing belt on the Citroen C4 Picasso 1.6 HDI. The timing belt on this engine…
How to Replace the Timing Belt on a Citroën C4 Picasso
How to Replace the Timing Belt on a Citroën C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) To replace the timing belt on a Citroën C4 Picasso, lift the car so that the front wheel is not in contact with the ground: once these bolts are loos…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos