Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Citroën C4 Picasso?

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Timing belt

In order to replace the timing belt of the Citroën C4 Picasso, you need to lift the car so that the front wheel is not in contact with the ground: once these screws have been loosened, the front wheel and the corresponding wheel arch can be removed from their housing. This will allow access to the central nut of the belt tensioner roller: in this way it will be possible to remove this pulley and remove the timing belt from its seat. At this point, the new replacement part can be inserted, bringing it into tension with the installation of the belt tensioner.

Posted on 3 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on the 2012 Citroen C4 Picasso
How to Replace the Timing Belt on the 2012 Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Today, you will learn how to replace the timing belt on the 2012 Citroen C4 Picasso independently. To perform the timing belt replacement, open the f…
When and How to Change the Timing Belt on the Citroen C4 Picasso 1.6 HDI
When and How to Change the Timing Belt on the Citroen C4 Picasso 1.6 HDI
Citroen C4 Picasso (2006-2013 / MK 1) This guide provides step-by-step instructions to remove and replace the timing belt on the Citroen C4 Picasso 1.6 HDI. The timing belt on this engine…
How to replace the timing belt of the Citroen C4 Picasso 1
How to replace the timing belt of the Citroen C4 Picasso 1
Citroen C4 Picasso (2006-2013 / MK 1) To replace the timing belt of the Citroën C4 Picasso model 1, we must open the front hood and disconnect the battery, then lift the front part of the…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos