Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Citroen C4

Model: Citroen C4 MK 3 - Years 2020-2026
Part: Service warning light

In this guide, we will discover the instructions that will allow us to reset the service light for the regular maintenance of the engine oil change on the Citroen C4. First, get inside the cabin and press and hold the button located at the end of the left-hand lever on the steering wheel; turn the ignition key to position one and wait for the countdown to finish on the display, as shown in the video. At this point, turn off the ignition and then start the engine, thus completing the reset operation!

Posted on 3 October 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 (2010-2018 / MK 2) In today's video tutorial, we will see the instructions to reset the service light for the regular maintenance oil change on a Citroen C4 Cactus. Fir…
Citroen C4 (2010-2018 / MK 2) To reset the maintenance and oil change light on the vehicle, follow these steps: access the cabin and sit in the driver's seat, locate the display i…
Citroen C4 (2010-2018 / MK 2) How do you reset the service light on a Citroen C4? Let's see how to reset the light on the C4. Turn on the ignition with the appropriate key (you wi…

Other guides you may be interested in

How to Reset the EDC Light on an Iveco Eurocargo

The engine light on an industrial vehicle like the Iveco Eurocargo must not be ignored. An engine fault on a heavy vehicle can cause serious damage to itself and others. After servicing, you can reset the EDC light, which is equivalent to an engine light, using the following method. Get into the vehicle, close the doors, and turn on the ignition: press the "call" button on the right side of the steering wheel once, then press the "down" button on the left side of the steering wheel twice. Now press the "menu" button on the right side of the steering wheel (below the phone button) and the "plus" button on the left side of the steering wheel. Now press "Ok" (still on the "call" button) and the light will turn off. Turn off the ignition and turn it back on to verify.

Watch the video!


by ScegliAuto

More videos