Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the On-Board Computer of a Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Warning light – error code

What to do if the maintenance light appears on a Citroen C3? Let's see how to reset the light. Turn on the instrument cluster with the appropriate key and check the instrument cluster (you will see the maintenance message), turn off the instrument cluster and press the button above it. The instrument cluster will automatically light up (wait for the seconds to count down). Once the seconds are up, you can release the button. Turn off the instrument cluster with the appropriate key, then turn it back on to verify the maintenance performed (the light should no longer be on).

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2009-2016 / SC) In order to reset the on-board computer of the Citroën C3, you will need to insert the ignition key into the corresponding ignition slot and turn it …
Citroen C3 (2016-2023 / SY, SX) The video shown here clearly explains how to access the actual control of the vehicle's system, specifically the on-board computer. With the instrume…
Citroen C3 (2016-2023 / SY, SX) Today we will explain how to adjust the brightness level of the on-board computer of the Citroen C3. To perform this operation, you will need to turn…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer
    • C3 2009-2016 - What does the orange warning light mean on Citroen C3? Read answer
    • C3 2009-2016 - What does the power steering light on a Citroen C3 mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos