Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Temperature Sensor on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine coolant temperature sensor

Video tutorial

To carry out this operation, I recommend first draining the cooling system. Before you can start, open the front bonnet of your Citroen Xsara Picasso.

The coolant temperature sensor is located on the lower right side of the engine block. Start by removing the relevant external clip, using a small flathead screwdriver if necessary.

Next, extract the sensor, disconnect the corresponding connector, and you will have completed the disassembly. To install the new sensor and close everything up, simply follow these instructions in reverse, and you will have completed the replacement.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Replacing the Coolant Temperature Sensor on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Today's main instructions will show you how to remove and replace the coolant temperature sensor on the engine of a Citroen Xsara Picasso. First, ope…
How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
Replacing the Fuel Pump of the Citroen Xsara Picasso
Replacing the Fuel Pump of the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this guide, we will see the useful instructions for removing and replacing the fuel pump of the Citroen Xsara Picasso. First, open the boot and st…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos