Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Heater Radiator on Citroen C2 - Peugeot 206

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Heater core

In this tutorial, you will find instructions for removing the cabin heater radiator on a Citroen C2, as well as on a Peugeot 206. First, open the bonnet of your car and remove the air filter box by unscrewing all the fixing screws; then, disconnect the hoses of the heater radiator fluid, allowing the fluid to drain. At this point, unscrew the screw of the fluid inlet plate of the radiator using a Torx screwdriver; now access the inside of the car to remove the internal plastics on the driver's side. Finally, disconnect the various electrical connectors until you can unclip and remove the radiator!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Air Conditioning Radiator on the Citroen C2
Replacing the Air Conditioning Radiator on the Citroen C2
Citroen C2 (2003-2010 / MK 1) Today, we will see in this video tutorial how to remove and replace the air conditioning radiator or condenser on the Citroen C2, following these sim…
How to replace the front brake pads of the Citroen C2.
How to replace the front brake pads of the Citroen C2.
Citroen C2 (2003-2010 / MK 1) Today we will see step-by-step instructions on how to disassemble and replace the front brake pads of the Citroen C2. First, we lift the vehicle and …
Where are the fuses of the Citroën C2 located?
Where are the fuses of the Citroën C2 located?
Citroen C2 (2003-2010 / MK 1) The fuses of the Citroën C2 are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be possi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos