Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Conditioning Radiator on the Citroen C2

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Radiator

Today, we will see in this video tutorial how to remove and replace the air conditioning radiator or condenser on the Citroen C2, following these simple steps. First, open the bonnet and start by removing the front bumper; to do this, unscrew the screws found at the top and bottom of the bumper, also removing those located on both sides of the wheel arches. Once the bumper is removed, you can take off the support bar of the frame; unscrew the radiator bracket bolts and disconnect the electrical connector. Now remove the pipes to replace it with the new one!

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses of the Citroën C2 located?
Where are the fuses of the Citroën C2 located?
Citroen C2 (2003-2010 / MK 1) The fuses of the Citroën C2 are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be possi…
Where is the Fuse Box on the Citroen C2?
Where is the Fuse Box on the Citroen C2?
Citroen C2 (2003-2010 / MK 1) If you don't yet know where the fuse box is located on your Citroen C2, don't worry as you will find all the necessary instructions below. First, ent…
How to reset the service light on the Citroen C2
How to reset the service light on the Citroen C2
Citroen C2 (2003-2010 / MK 1) If you want to manually reset the service light of your Citroen C2, you just need to follow these steps. First of all, enter the passenger compartmen…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos