Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Stop Bulb on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Tail light bulb

Before you can begin, open the rear hatch of the boot on your Citroen C3. Start by unscrewing and removing the screws that secure the rear light to the car. This will free the light, allowing you to extract it from its housing and access the back of the stop bulb. Next, disconnect the relevant electrical connector, and then unclip the bulb. Once you have completed this step, you can remove the bulb, successfully finishing the disassembly. To fit the new bulb and close everything up, simply follow these instructions in reverse, and the replacement will be complete.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the third brake light bulb of a Citroen C3
How to change the third brake light bulb of a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today we will see how to change the third brake light bulb of a first series Citroen C3. Let's start the operation by immediately opening the rear tr…
How to Replace the Third Brake Light Bulb on a Citroen C3
How to Replace the Third Brake Light Bulb on a Citroen C3
Citroen C3 (2009-2016 / SC) Before starting, open the tailgate of the boot on your Citroen C3. Using a flathead screwdriver and leveraging, start by unclipping the clips that se…
Removing Third Brake Light on Citroen C3
Removing Third Brake Light on Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this brief video tutorial, you will learn how to remove the third brake light on a Citroen C3. First, open the boot lid, and inside the two holes …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos