Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to remove the mirror of a Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Outside rearview mirror
Operation: How to remove the mirror of a Citroen C3

Before starting, we will have to open the door of our Citroen C3. Let's start by removing the door panel, unscrewing the screws that secure it, and then releasing the support hooks. By doing so, we will have reached the two pins connected to the mirror, which we will have to go and disconnect. After that, we will have to go and disengage the cover placed near the internal mirror, and we will have discovered the screws that fix the mirror, which we will have to unscrew and remove, and then extract the mirror itself, and the disassembly will be completed.


Posted on 13 January 2024 by ScegliAuto

    Frequently Asked Questions

    • C3 2016-2023 - Why does the exterior mirror of the Citroen C3 not close? Read Answer
    • C3 2009-2016 - How to disassemble the body of the electric mirror of the Citroen C3? Read Answer
    • C3 2016-2023 - Why does the exterior mirror of the Citroà «n C3 not work? Read Answer
    • C3 2002-2009 - Where is the external temperature sensor of the Citroen C3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos