Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace the third brake light bulb on our Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Third brake light
Operation: How to replace the third brake light bulb on our Citroen C3

Before starting, we will have to go to open the tailgate of the luggage compartment of our Citroen C3. Using a flat screwdriver and leveraging, we begin by unhooking the hooks that secure the third stop. Once this is done, we will have to go and extract the third stop from its housing. By doing so, we will have reached the burned out light bulb. We then proceed by going to disengage it from its connector. When we have completed this step, we will be able to remove the bulb, and we will have finished the disassembly. To fit the new bulb and close the third stop, we will only have to repeat this procedure in reverse, and the replacement will be finished.


Posted on 13 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos