Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulbs on the Citroen C3 Aircross

Model: Citroen C3 Aircross MK 1 - Years 2017-2024
Part: Headlight bulb

In this video tutorial, see how to remove and replace the front headlight bulbs on the Citroen C3 Aircross, as well as on the C5 Aircross. First, open the bonnet of your car and start by removing the plastic protective cap of the bulbs, found at the rear of the headlamp; then disconnect the electrical connector of the bulb and pull it out to remove it. At this point, replace it with a new one of the correct type (in this case, the dipped or main beam bulb type H7) and reassemble everything by applying the reverse procedure!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb on the Citroen C3 Aircross
Replacing the Front Headlight Bulb on the Citroen C3 Aircross
Citroen C3 Aircross (2017-2024 / MK 1) The steps outlined in this guide will show you how to remove and replace the dipped beam bulb in the front headlight of the Citroen C3 Aircross. Firs…
How to Replace the Front Headlight Bulb on the Citroen C3 Aircross
How to Replace the Front Headlight Bulb on the Citroen C3 Aircross
Citroen C3 Aircross (2017-2024 / MK 1) Here are the instructions to remove and replace the front headlight bulb on the Citroen C3 Aircross. First, open the bonnet of the vehicle and start …
How to Change the Headlight Bulb on a Citroen C3 Aircross
How to Change the Headlight Bulb on a Citroen C3 Aircross
Citroen C3 Aircross (2017-2024 / MK 1) Hello everyone, today I will show you how to replace the headlight bulb on our Citroen Aircross. Like many other maintenance tasks, this one is relat…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos