Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper from a Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Front bumper

Before you can start, open the bonnet. Begin by unscrewing the Torx screws on the upper side of the bumper. Once done, proceed to unscrew and remove the screws and bolts located in the wheel arch. After completing this step, you will also need to remove the two bolts at the lower side of the bumper. By doing this, you can detach the bumper from the car and gently place it on the ground, allowing you to remove the last two side clips that secure it. Once these two clips are removed, you will have successfully completed the removal of the bumper.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Front Bumper of the Citroen C3
How to Remove and Replace the Front Bumper of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Here are the instructions on how to remove and replace the front bumper of the Citroen C3. First, open the bonnet of the vehicle and start removing a…
How to disassemble and replace the front bumper of the Citroen C3
How to disassemble and replace the front bumper of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today's video will show us how to disassemble and replace the front bumper of the Citroen C3. First, we open the hood of the car and start unscrewing…
How to Remove the Front Bumper from a Citroen C3
How to Remove the Front Bumper from a Citroen C3
Citroen C3 (2009-2016 / SC) Before starting, open the front bonnet of your Citroen C3. Begin by unscrewing and removing the screws located on the upper side of the bumper using …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos