Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Citroen Jumpy Van?

Model: Citroen Jumpy MK 1 - Years 1994-2007
Part: Service warning light

Resetting the service light on the Citroen Jumpy van, an operation to be performed only after completing the service, is very simple. First, turn off the ignition and press the small right button, as shown in the video. While holding it down, turn the key and switch on the ignition. You will see a ten-second countdown appear on the display, which will conclude the reset procedure when it reaches zero. At this point, turn off and then turn on the ignition again to confirm that the procedure has been completed correctly.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Citroen Jumpy van?
How to reset the service in the Citroen Jumpy van?
Citroen Jumpy (1994-2007 / MK 1) In this tutorial, we will see how to reset the service indicator in the Citroen Jumpy van. This operation is extremely simple and quick, and it shoul…
How to Reset the Service Light in a Citroen Jumpy Van?
How to Reset the Service Light in a Citroen Jumpy Van?
Citroen Jumpy (2016-2026 / MK 3) In this tutorial, you will see how to reset the service light in a Citroen Jumpy van, a very simple and quick operation that should only be done afte…
How to Reset the Service Light in a Citroën Jumpy Van
How to Reset the Service Light in a Citroën Jumpy Van
Citroen Jumpy (2007-2016 / MK 2) In this tutorial, you will see how to reset the service light in a Citroën Jumpy van, a very simple and quick operation to perform only after complet…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos