Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Radio on Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Car stereo

Turn off the car and remove the ignition key. To remove the car radio on this model, as with many others, insert the appropriate pins into the four holes located at the corners. Ensure they are seated correctly and pushed all the way in, then pull both pins simultaneously to extract the radio without issues. Press the tab on the connector to detach the antenna cable, then push the tab on the double connector and lift the small bar to remove it. Insert the frame of the new radio after passing all the cables through it, connect them, and install the radio.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Citroen C3
How to Remove the Radio from a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Before you begin, sit in the driver's seat of your Citroen C3. Start by inserting the extraction keys into the holes on the front of the radio to unc…
How to Remove the Radio from a Citroen C3
How to Remove the Radio from a Citroen C3
Citroen C3 (2009-2016 / SC) Before you start, sit in the driver's seat of your Citroen C3. Begin by inserting the extraction keys into the holes on the front of the radio. This …
Replacing Radio in Citroen C3
Replacing Radio in Citroen C3
Citroen C3 (2002-2009 / FC, FN) Use the appropriate double pins by inserting them into the four corners of the radio until they reach the end. This will press on the retaining pins,…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - What to do if the Citroen C3 display does not turn on? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos