Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroen C3 Aircross?

Model: Citroen C3 Aircross MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on the Citroen C3 Aircross takes only a few minutes. It is a task that anyone can do and is simple to complete without going to a garage.

Proceed as follows. With the instrument cluster off, press the button with the spanner as shown in the video.

Keep it pressed while turning the key to power on the instrument cluster again. This will start a ten-second countdown on the display during which you must continue to hold the button.

At the end, the display will show a message indicating that the service light has been reset. You can then turn off the instrument cluster.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Citroen C3 Aircross
How to Reset the Tyre Pressure Light on a Citroen C3 Aircross
Citroen C3 Aircross (2017-2024 / MK 1) Learn how to reset the tyre pressure light on a Citroen C3 Aircross. To set the tyre pressure light: turn on the vehicle's ignition, use the buttons …
How to Reset the TPMS Light on a Citroen C3 Aircross
How to Reset the TPMS Light on a Citroen C3 Aircross
Citroen C3 Aircross (2025-2026 / Cc24) Today, we will explain how to reset the tyre pressure monitoring system (TPMS) light on a Citroen C3 Aircross. Turn on the instrument panel and press…
How to Reset the Service Light on the Citroen C3 Aircross?
How to Reset the Service Light on the Citroen C3 Aircross?
Citroen C3 Aircross (2017-2024 / MK 1) In this tutorial, you will learn how to reset the service light on the Citroen C3 Aircross, a very simple and quick operation to perform only after c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos