Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Spring in the Key Fob for Citroen C3 Models

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Key

If the spring return mechanism in the car's key fob breaks, follow these steps to replace it: take the key fob and open it by prying with a screwdriver in the middle. Locate the small threaded metal pin that acts as the spring return for the key and replace it with a new one. Be careful with the positioning as it needs to be inserted into its seat with pressure, and once in, it should be rotated about half a turn to secure it. At this point, close the key fob casing by applying some pressure.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Opening the bonnet of the Citroen C3 is a very simple operation. As shown in the video, just pull the red lever under the steering wheel and the bonn…
How to Change the Headlight Bulb on a Citroen C3
How to Change the Headlight Bulb on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Replacing the front headlight bulb on the Citroen C3 (H7 fitting) is quite straightforward as there is enough room to manoeuvre behind the headlight …
How to repair the glove compartment handle of the Citroen C3
How to repair the glove compartment handle of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today we will discover the main instructions that will allow us to disassemble and repair (or possibly replace) the glove box handle of the Citroen C…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - Why don't the USB sticks on the Citoren C3 work? Read answer
    • C3 2016-2023 - What does the wrench light on my Citroen C3 mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos