Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service on the Citroën C3?

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Warning light – error code

Resetting the service on the Citroën C3 is very simple; let's see how to proceed in the attached video tutorial. Obviously, this procedure should only be carried out after completing the various tasks outlined in the vehicle's user and maintenance manual. To reset the service, with the key inserted and the instrument panel off, press and hold the button depicting a spanner. At the same time, turn the key and switch on the ignition. A countdown of 10 seconds will appear on the display, after which the service will be reset. You can switch off and then switch on the ignition again to verify that the operation was successful.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2002-2009 / FC, FN) How to reset the service indicator on a Citroen C3? This is a very simple operation; enter the vehicle, turn on the instrument panel with the appropr…
Citroen C3 (2009-2016 / SC) Here’s how to reset and reconfigure the service on a Citroen C3 (indicator light). Press the button located near the onboard computer display; turn o…
Citroen C3 (2002-2009 / FC, FN) In today's video, you will learn how to reset the service light on the first series Citroen C3. Enter the vehicle and sit in the driver's seat. Press…

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer
    • C3 2009-2016 - What does the orange warning light mean on Citroen C3? Read answer
    • C3 2009-2016 - What does the power steering light on a Citroen C3 mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos