Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Indicator on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Service warning light

How to reset the service indicator on a Citroen C3? This is a very simple operation; enter the vehicle, turn on the instrument panel with the appropriate key, and press the button (hold down the fixed button) located near the car's speedometer. Wait for the seconds to pass as shown in the video. Release the previously pressed button and turn off the instrument panel after the service reset; turn it back on to check the service reset setting. Always remember to make changes to the car's service while it is stationary and turned off.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2009 Citroen C3
How to Reset the Service Light on a 2009 Citroen C3
Citroen C3 (2002-2009 / FC, FN) Resetting the service light on a 2009 Citroen C3 is a straightforward operation that can be done independently. The first step is to turn on the inst…
How to Reset the Service Light on the Citroen C3
How to Reset the Service Light on the Citroen C3
Citroen C3 (2002-2009 / FC, FN) In today's video, you will learn how to reset the service light on the first series Citroen C3. Enter the vehicle and sit in the driver's seat. Press…
How to Reset the Service Light on a Citroen C3 2018
How to Reset the Service Light on a Citroen C3 2018
Citroen C3 (2016-2023 / SY, SX) When your Citroen C3 requests a service, do not ignore this warning: it is a safety alert for you and others. After completing all necessary checks, …

    Frequently Asked Questions

    • C3 2016-2023 - What does the illumination of the Service warning light mean in the Citroen C3? Read answer
    • C3 2002-2009 - How to reset the "Service" warning light on a Citroen C3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos