Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the maintenance light on the Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Warning light – error code

Today we will guide you through resetting the service light for the regular maintenance oil change on the Citroen C3. First, get inside the vehicle and ensure all doors are closed; then press and hold the button found on the right side of the instrument cluster until the service mileage starts to flash, as shown in the video. Now wait for the countdown to finish to complete the reset of the maintenance light, following the video tutorial until the end!

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2002-2009 / FC, FN) To reset the Service light on a Citroën C3, press and hold the button located on the right side of the instrument cluster while it is off. At this po…
Citroen C3 (2002-2009 / FC, FN) To reset the service light on a Citroen C3, start by pressing (and holding) the button/dial located to the right of the display. At the same time, tu…
Citroen C3 (2002-2009 / FC, FN) To reset the service light on a Citroën C3, turn off the engine and the instrument cluster. Press and hold the button under the odometer used to rese…

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer
    • C3 2009-2016 - What does the orange warning light mean on Citroen C3? Read answer
    • C3 2009-2016 - What does the power steering light on a Citroen C3 mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos