Do it yourself
Frequently asked questions about cars and motorcycles

Reset Service on Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Warning light – error code

Do you want to reset the maintenance light on your car? Let's see how to reset the light on a Citroen C3. Turn on the ignition with the key (you will see the maintenance message), turn off the ignition and press the button located on the left of the instrument panel. Turn on the ignition (without releasing the button) and wait for the seconds to count down. Turn off the ignition with the key, then turn it back on to check the maintenance status (the light should no longer be illuminated). Adjust the various options with the vehicle stationary and the engine off.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2016-2023 / SY, SX) The reset of the service light on the Citroen C3 vehicle follows the same procedure as resetting the light related to the maintenance of Peugeot vehi…
Citroen C3 (2002-2009 / FC, FN) To manually reset the service light that remains illuminated on the dashboard of your first-generation Citroen C3, follow all the steps outlined in t…
Citroen C3 (2009-2016 / SC) To reset the Service light of the Citroën C3, press and hold the button located at the bottom right of the speedometer. While holding it, turn the ke…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer
    • C3 2009-2016 - What does the orange warning light mean on Citroen C3? Read answer
    • C3 2009-2016 - What does the power steering light on a Citroen C3 mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos