Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Citroen C3 Picasso?

Model: Citroen C3 Picasso MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

Video tutorial

Resetting the tyre warning light on a Citroen C3 Picasso is very simple; let's see how to proceed in this tutorial. First, ensure all tyres are at the correct pressure.

Turn on the ignition, press the "menu" button, and use the directional arrows to enter the "personalisation-configuration" section, then go to "define parameters in the vehicle", followed by "driving aids", and finally "tyre inflation". At this point, press the "OK" button to confirm your choice; the warning light will start flashing and then disappear completely.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Citroën C3 Picasso?
How to reset the tyre pressure warning light on the Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) You can make the tyre pressure warning light on the Citroën C3 Picasso disappear by inflating the tyres until they reach the recommended pressure val…
How to reset the tyre pressure warning light on the Citroën C3 Picasso?
How to reset the tyre pressure warning light on the Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Reset the tyre pressure warning light on the Citroën C3 Picasso after all four tyres have been inflated to the correct pressure. To reset it, turn on…
How to Reset the Tyre Warning Light on a Citroen C3 Picasso?
How to Reset the Tyre Warning Light on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) As shown in this tutorial, resetting the tyre warning light on a Citroen C3 Picasso is an extremely simple and quick operation. Before proceeding, en…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos