Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Citroen C3 Picasso?

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part:

As shown in this tutorial, resetting the tyre warning light on a Citroen C3 Picasso is an extremely simple and quick operation. Before proceeding, ensure that you have restored the correct pressure in each tyre according to the instructions in the manual. Start by turning on the instrument cluster, then press the "Menu" button on the radio and enter the "Personalisation-configuration" section. Next, select "Define vehicle parameters", then "Driving assistance" and go to "Tyre pressures". At this point, simply confirm the reset and restart the vehicle.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Citroën C3 Picasso?
How to reset the tyre pressure warning light on the Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) You can make the tyre pressure warning light on the Citroën C3 Picasso disappear by inflating the tyres until they reach the recommended pressure val…
How to reset the tyre pressure warning light on the Citroën C3 Picasso?
How to reset the tyre pressure warning light on the Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Reset the tyre pressure warning light on the Citroën C3 Picasso after all four tyres have been inflated to the correct pressure. To reset it, turn on…
How to Reset the Tyre Pressure Light on a Citroën C3 Picasso?
How to Reset the Tyre Pressure Light on a Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) You can completely clear the Service light on the Citroën C3 Picasso by inflating the tyres to the optimal pressure value: this value is indicated on…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos