Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Replacement of the cabin filter on the Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Cabin air filter
Operation: Replacement of the cabin filter on the Citroen C3

If we intend to replace the cabin filter on this car model, in the text that has shown below we will find all the indications and the various steps to follow to correctly replace it. Access the engine compartment and locate the air filter located on the right side just below the windshield. Use a screwdriver to remove the two fixing screws of the filter cover. Proceed to remove the cover and take out the filter to replace it with the new one and then reposition the plastic cover and fasten the screws again.


Posted on 22 July 2022 by ScegliAuto

    Frequently Asked Questions

    • C3 2002-2009 - Where is the Citroen C3 cabin air filter located? Read Answer
    • C3 2009-2016 - Where is the cabin filter of the Citroen C3 II? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos