Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Windscreen Wiper Blade Replacement

Model: Citroen C3 Picasso MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Windshield wipers

Video tutorial

This video tutorial explains how to replace the wiper blade on a Citroen C3 Picasso. First, secure the wiper arm so that the blades are raised, then lift them as if you were cleaning the windscreen.

Pressing on the clip, slide the blade off each wiper arm. Obtain new blades, insert them into the wiper arm and attach them by pressing on the clip. Apply pressure until you hear the click of engagement.

Finally, test the operation by activating the wiper.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Windscreen Wiper Blade Replacement
Windscreen Wiper Blade Replacement
Citroen C3 Picasso (2008-2017 / MK 1) Replacing the rear wiper blade is a very simple task, but it is often overlooked compared to the front blades. However, it is important that the rear…
How to Replace the Rear Stop Bulbs on the Citroen C3 Picasso
How to Replace the Rear Stop Bulbs on the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Replacing the bulbs in the rear lamp is very simple to do yourself, even though you need to remove the lamp itself. Open the rear bonnet and locate t…
Citroen C3 Picasso Engine Air Filter Replacement
Citroen C3 Picasso Engine Air Filter Replacement
Citroen C3 Picasso (2008-2017 / MK 1) Keeping the engine air filter clean is very important to ensure the correct airflow into the engine for creating the combustion mixture with the fuel…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos