Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace manual transmission oil on a Citroen C3?

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Gear oil
Operation: How to replace manual transmission oil on a Citroen C3?

The youtuber teaches us how to replace the manual gearbox oil in a Citroen C3 with a video full of photographic and textual details. As he shows us, to introduce the new oil we must first remove the battery cover and the air tube. Open the oil inlet hole and, with a funnel, pour in the gearbox oil of the type and in the quantity indicated by the parent company. To remove the old oil we have to go under the car, remove the plastic protection panel and, with a special key, unscrew the locking pin to let the used oil flow out which will be collected outside in a suitable container.


Posted on 11 December 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2016-2023 - How much gearbox oil on Citroen C3? Read Answer
    • C3 2002-2009 - How many liters of oil do you need for the automatic transmission of the 2004 Citroen C3? Read Answer
    • C3 2002-2009 - Where is the Citroà «n C3 gear oil tank cap located? Read Answer
    • C3 2016-2023 - How much oil does the Citroen C3 gearbox contain? Read Answer
    • C3 2002-2009 - How much gearbox oil does the Citroen C3 need? Read Answer
    • C3 2002-2009 - Where is the cap to add oil to the Citroen C3 gearbox? Read Answer
    • C3 2002-2009 - Where is the Citroen C3 gearbox oil filler cap located? Read Answer
    • C3 2009-2016 - How much does it cost to replace the automatic gearbox oil on the Citroen C3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos