Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Citroen C2

Model: Citroen C2 MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

This video is currently unavailable

In today's tutorial video, you will learn how to remove and replace the standard radio in a Citroen C2, following the instructions below. First, get inside the vehicle and start by removing the original radio using the appropriate extraction tools; then disconnect all the electrical cables at the back, as shown in the video.

At this point, replace the radio with the new one of the correct type (make any necessary modifications to the wiring to install a more recent radio); apply the reverse procedure for reassembly!


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to change the car radio and how to install a stereo in a Citroen C2
How to change the car radio and how to install a stereo in a Citroen C2
Citroen C2 (2003-2010 / MK 1) Changing the car radio on the Citroën C2 is a fairly simple operation, you just need to have a bit of skill. Start by removing the front panel of the…
Removing the Car Radio and Inspection
Removing the Car Radio and Inspection
Citroen C2 (2003-2010 / MK 1) To remove the car radio from the console, insert the appropriate tools into the side slots of the radio to release the retaining springs. These tools…
Where are the fuses of the Citroën C2 located?
Where are the fuses of the Citroën C2 located?
Citroen C2 (2003-2010 / MK 1) The fuses of the Citroën C2 are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be possi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos