Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Another Cigarette Lighter on the Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Cigarette lighter

If you intend to add a second cigarette lighter to your vehicle, you can proceed by following the instructions in this video and the description provided below. First, you will need to drill a hole in the centre console, perhaps behind the handbrake lever. Then, wire the new cigarette lighter by connecting the electrical terminals and run the wires under the console and behind the dashboard. After that, apply power and check that the bulb lights up; this additional cigarette lighter can also be used as a USB port for charging devices.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Armrest on the Citroen C3
How to Install the Armrest on the Citroen C3
Citroen C3 (2009-2016 / SC) Installing the armrest on the seat of the Citroen C3 is a very simple task that can be done independently. There are 5 steps to follow: The first ste…
How to Remove and Install the Roof of the Citroen C3 Pluriel Spyder
How to Remove and Install the Roof of the Citroen C3 Pluriel Spyder
Citroen C3 (2003-2010 / Pluriel) In this guide, you will find the main instructions on how to remove and install the roof of the Citroen C3 Pluriel Spyder. First, open the rear hatch…
Where is the fuse for the cigarette lighter in the Citroen C3?
Where is the fuse for the cigarette lighter in the Citroen C3?
Citroen C3 (2002-2009 / FC, FN) This video shows where to find the fuse for the cigarette lighter in the Citroen C3, which is the first element to check in case of sudden malfunctio…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos