Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Fitting Tyres

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tires

See other generations:
Video tutorial

When installing the tyre onto the hub while the car is on a jack, it is advisable to clean the seating on the hub of any oxide and debris using a wire brush, and then apply some grease. This will allow the rim to fit perfectly onto the hub, avoiding eccentricity that can lead to vibrations while driving.

After cleaning, position the wheel by aligning the fixing holes, manually screw in the four bolts, and tighten them with a spanner in a criss-cross pattern to ensure even fitting.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Light Bulb on Citroen C3
How to Replace the Interior Light Bulb on Citroen C3
Citroen C3 (2016-2023 / SY, SX) Below are the instructions that will allow you to remove and replace the interior light bulb on the Citroen C3. First, get inside the vehicle and sta…
How to Reset the Tyre Pressure Light on a Citroën C3?
How to Reset the Tyre Pressure Light on a Citroën C3?
Citroen C3 (2016-2023 / SY, SX) The tyre pressure light that appears on the instrument panel of the Citroën C3 can be cleared by inflating the tyres until they reach the optimal pre…
Resetting the Tyre Pressure Light on Citroen C3
Resetting the Tyre Pressure Light on Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this short video tutorial, learn how to reset the tyre pressure warning light on a third-generation Citroen C3. Before performing the reset proced…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos