Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to remove the front door lock on Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Lock
Operation: How to remove the front door lock on Citroen C3

In this video tutorial we will see the steps to disassemble and replace the Citroen C3 lock cylinder, following the instructions below. First of all we open the front door and start removing the plastic cover of the cylinder; then we use a drill bit to remove the rivets that we find on the sides of the cylinder, as shown in the video. At this point we unscrew the screws of the lock, which we find on the sides, using a torx screwdriver; then remove the handle and then the cylinder, applying the reverse procedure for reassembly!


Posted on 12 May 2023 by ScegliAuto

    Frequently Asked Questions

    • C3 2016-2023 - How much does it cost to replace the lock on my Citroen C3? Read Answer
    • C3 2002-2009 - Cost of changing door lock Citroen C3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos