Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Lock from the Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Door lock

This guide briefly outlines the main instructions for removing and replacing the door lock on the Citroen C3. First, open the door and begin to remove the door panel; to do this, unscrew all the fastening screws found on it, removing the window lift handle as shown in the video. At this point, unscrew the lock screws located on the sides using a Torx screwdriver; then remove the lock module and replace it with the new one, following the video tutorial to the end!

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Door Lock on a Citroen C3
How to Change the Door Lock on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Change the lock on the Citroen C3? Here’s how to remove the cylinder from inside the door. Unscrew the screws on the side of the door, use a plastic …
How to Remove the Lock Cylinder of the Citroen C3
How to Remove the Lock Cylinder of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Briefly, we will see the instructions that will allow you to remove and replace the lock cylinder of the Citroen C3. First, open the front door and s…
Removing Lock Cylinder on Citroen C3
Removing Lock Cylinder on Citroen C3
Citroen C3 (2002-2009 / FC, FN) Let's see how to remove the lock cylinder from a first-generation Citroen C3 by following these simple steps. First, open the front door and remove t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos