Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel in a Citroen Berlingo Van?

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the door panel in a Citroen Berlingo van, a very simple and quick operation. First, use a plastic spatula to unclip the handle frame.

Then, unscrew the two screws located underneath it using a Torx T30 key. Next, unscrew the two additional screws on the outer edge and the last one on the inner edge. At this point, remove the mirror cover, grasp the panel from the bottom, and unclip it from the door.

Once the lock cable is disconnected, you can fit the replacement.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of the Citroen Berlingo
How to Remove the Front Door Panel of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today, this guide shows how to remove and replace the front door panel of the Citroen Berlingo, following the instructions below. First, open the fro…
How to Remove the Door Panel of the Citroen Berlingo
How to Remove the Door Panel of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) This guide illustrates the procedure for removing and replacing the door panel of the Citroen Berlingo, as well as the Peugeot Partner. First, open t…
Removing Door Panel from Citroen Berlingo
Removing Door Panel from Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Remove the door panel from the Citroen Berlingo. Let's see how to detach the cover panel. Remove the trim from the internal handle and the frame of t…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos